logo
Tax Credit

A. B. Martin Roofing Supply LLC
150 Slate Road
Ephrata, Pa 17522
717-445-6885

commercialindpanelandtrims_clip_image002

  The "PBR" family of panels performs superbly on roof pitches as low as 1:12 and on spans up to 4' for 26 gauge, up to 5' spans for 24 gauge. Our R panel has been engineered and designed to be structurally sound. For excellent strength and leak resistance, our PBR panel has full 1 1/4" high major ribs which are 1" wide at the top and over 3" wide at the base. For roof applications, our PBR panel provides extra support at the lap. Sealant tape and stitch screws are required for improved leak resistance. PBR panel is used mostly for steel frame buildings, but can also be used on wood frame buildings.

commercialindpanelandtrims_clip_image004

  For an architecturally attractive look, try our "A" Panel on your side walls and interior liner. "A" Panel is the same design as PBR but the paint is on the reverse side. The panel is also installed in reverse. The PBR panels and "A" Panels are all 38" wide and provide 36" of coverage. The major ribs are 12" on center with two oversized minor ribs between each major rib for extra strength.

  Both the PBR panel and the A panel are available in painted 26 gauge galvanized, 26 gauge bare galvalume, and 24 gauge bare galvalume. All panels have a 40 year limited warranty. (See Warranty) Since you are buying directly from the manufacturer your order can normally be completed in less than a week!

© 2009 copyright
All rights reserved
A. B. Martin Roofing Supply

A. B. Martin Roofing Supply LLC
35 Ridge Road
Newville, Pa 17241
717-776-5951