Snow Defender PC240

The PC240 is an all Polycarbonate Snow Guard. This snow guard is clear which it makes it all but invisible.

• Polycarbonate Lexan 103-112
• UV Stable
• Screw or Adhesive Mounted
• Very Strong
• 50 Per box
• Made In USA
• Patent Pending
• Can be attached mechanically or glued using SB190

Clear Snow Guard ~ RTCLSR

  The RTCLSR is a crystal clear polycarbonate snow guard that can be installed over a structural rib. The unique vent rib system allows for adhesive out gassing, which increases the strength.

Clear Snow Guard ~ RTMINI

  This polycabonate snow guard blends in with the roof when you insert a color chip or emblem in the “Snowflake” slot. The RTMINI has a 1.5” wide base to fit ribbed roof channels. They can be attached with adhesives, screws, or VHB tapes.

No. 100 Snow Guards
for Flat Metal Roof Surfaces

  Ideal for mounting to corrugated or flat roof panels. Stainless steel offers no corrosion problems or stains and is suitable for paint to match your roof. The copper guard can be soldered or fastened to copper roof panels. These guards provide 8.75 square inches of stopping area. Holes for #8 screws or rivets. 1" x 2" flat mounting area. Use neoprene washer screws to fasten. All roof penetrations should be sealed with adhesive sealant.

SB-190 Surebond Everseal

  A versatile, hard setting, one part adhesive specially designed for a wide variety of industrial sealing. This unique formula possesses up to 2000 lbs. of tensile strength. The SB-190 is a field proven sealant adhesive. This adhesive/sealant requires 28 consecutive days (672 consecutive hours) with temperatures of 50 degrees Fahrenheit or greater to cure properly. Please follow directions for best results. Under certain conditions, temporary measures may need to be employed to hold the snow guard in place until initial set of adhesive has taken place. Available in 10.3 oz. tubes with 24 tubes per case. One tube will adhere 8-10 CL Snow Guards and 14-16 RTMINI Guards. A. B. Martin Roofing Supply LLC does not warrant adhesive failure. The adhesives are offered for the convenience of the user who assumes full responsibility for its use. These adhesives are used throughout the industry for adhering snow guards with successful results utilizing the directions of the adhesive manufacturer. Recommended for use only when weather conditions permit proper curing per manufacturer's instructions.