RT300

  RT300 Snow Guards are non-penetrating devices which are secured to the standing seams of metal roofs utilizing stainless steel set screws to clamp them in place. They require no glues or sealants, and will not restrict thermal movement or contribute to unsightly oilcanning They are particularly suited to double-lock and mechanically seamed metal roofing, and being traditional in design, they are ideal for restoration and preservation work.

AP400

  AP400 Snow Guards are non-penetrating devices which have been engineered specifically for use with the more popular structural and non-structural preformed and architectural metal roof systems. They are secured without glues or sealants, and utilize custom milled stainless steel set screws to clamp them in place. They are produced in cast aluminum. The attachment of the AP Snow Guard does not restrict thermal movement, and the deep throat permits it to be secured directly without damaging caps or compressing internal gasketing or sealant pockets. The wide, deep blade design makes it particularly effective in retaining snow with the higher seams and wider panel widths common in preformed architectural roofing.

No. 1 Snow Guard

  The roofer’s choice since 1883 for use on standing seam metal roofs. They are pinched to clamp on the top of the seam providing a rigid permanent job.

Clear Snow Guard Series ~ RTCLSM 

  The Clear Snow Guards are manufactured in a crystal clear polycarbonate with U.V. stabilizers. The unique vent rib system allows for adhesive out gassing, which increases the shear and mechanical strength. The three to one base to blade ratio adds significantly to the shear and peel adhesion of the device to the surface. Superior engineering, along with the structured ribs, prevent common blade breakage. The Clear Snow Guards are also well suited for mechanical attachments and can be attached to any panel having a flat surface of as little as 3-1/2" wide.

 RTMINI ~ Clear Snow Guards

  RTMINI Clear Snow Guards are manufactured in a high clarity polycarbonate plastic with U.V. stabilizers which provides strength and longevity. They have a low visibility and blend with roof materials. The RTMINI has a 1.5" wide base to fit parapet ribbed roof channels. They are manufactured with a 4.5 square inch holding area, a 2:1 base to blade ratio and a gusseted blade snow pocket that combine to effectively retain snow. They can be attached with adhesives, screws or VHB Tapes. The RTMINI features a blade "Snowflake" slot that accepts a metal color chip or custom emblem.

Snow Boss #650

  SNOW BOSS #650 Series is constructed with durable UV resistant polycarbonate and is compatible with all non-copper metal roof systems. The Model #650 includes a new patent pending base design, which is the latest technological advance in adhesive mounted (SB-190) snow guard systems. This cross hatch design strengthens adhesive grip by increasing surface area and texture, and provides for faster solvent escape, and adhesive curing. The series of evenly spaced holes in the base allow the solvents to dissipate quickly, and become “glue rivets” when the adhesive keys in the holes for a more secure application.

SB-190 Surebond Everseal

  A versatile, hard setting, one part adhesive specially designed for a wide variety of industrial sealing. This unique formula possesses up to 2000 lbs. of tensile strength. The SB-190 is a field proven sealant adhesive. This adhesive/sealant requires 28 consecutive days (672 consecutive hours) with temperatures of 50 degrees Fahrenheit or greater to cure properly. Please follow directions for best results. Under certain conditions, temporary measures may need to be employed to hold the snow guard in place until initial set of adhesive has taken place. Available in 10.3 oz. tubes with 24 tubes per case. One tube will adhere 8-10 CL Snow Guards and 14-16 RTMINI Guards. A. B. Martin Roofing Supply LLC does not warrant adhesive failure. The adhesives are offered for the convenience of the user who assumes full responsibility for its use. These adhesives are used throughout the industry for adhering snow guards with successful results utilizing the directions of the adhesive manufacturer. Recommended for use only when weather conditions permit proper curing per manufacturer's instructions.